Daiwa CN 801HP SWR Meter 1.8 Frequency range: 1.8 - 200MHz

Daiwa CN 801HP SWR Meter

A professional grade Cross Needle SWR and Power meter that also measures P.E.P. ( Peak Envelope Power ) for SSB operation. An extra large meter allows accurate readings of forward & reverse power, with SWR read at the dual dual meter crossover point. This is the latest version of this meter and has switchable illumination.

* Frequency 1.8~200MHz
* Power range 20/200/2kw
* Tolerance +/-10%(at FULL SCALE)
* SWR measurement 1:1~1:8
* SWR detection sensitivity 5W
* Impedance 50Ohms
* Connectors SO-239
* DC Power supply DC 13.8V(70mA)
* Dimensions 157(W)x112(H)x116(D)mm 

SWR DAIWA 801HP

SWR DAIWA 801HP

Daiwa CN 801HP Quality Power/SWR meter covers 1.8-200Mhz

A professional grade Cross Needle SWR and Power meter that also measures P.E.P. ( Peak Envelope Power ) for SSB operation. An extra large meter allows accurate readings of forward & reverse power, with SWR read at the dual dual meter crossover point. This is the latest version of this meter and has switchable illumination.

* Frequency 1.8~200MHz
* Power range 20/200/2kw
* Tolerance +/-10%(at FULL SCALE)
* SWR measurement 1:1~1:8
* SWR detection sensitivity 5W
* Impedance 50Ohms
* Connectors SO-239
* DC Power supply DC 13.8V(70mA)
* Dimensions 157(W)x112(H)x116(D)mm 

Kenwood TM 281A

SPECFICATIONS

GENERAL
Frequency Coverage	VHF TX/RX  136.000 – 173.995 Mhz
Type of emissions	F3E (FM)
No. of memory Ch.	200
Operating Temperature	-10OC ~ +60OC
Frequency stability	+ 3 ppm  at 25OC
Operating Voltage	13.8V DC + 15%
Current drain (at 13.8 V DC)	Tx            high (65 W)          14A typical
	Rx            Max audio             1A typical
Antenna Impedance	50 Ω (SO-239)
Alphanumeric LCD display
Frequency name tag
Built-in CTCSS and DTS encoder/decoder
TRANSMITTER
Output power	Hi: 65W/Lo:25W
Modulation	Variable reactance modulation
Max. freq. devition	+5.0Khz(wide)/+2.5Khz(narrow)
Modulation distortion	< 3% (300 Hz- 3 Khz)
Microphone impedance	600Ω(8-pin modular)
RECEIVER
Intermediate Freq.	49.95Mhz/450Khz
Sensitivity	Less than 0.18 µV (at 12db SINAND)
Squelch sensitivity	0.1 µV typical (threshold)
Selectivity	Wide > 12Khz (at- 6dB), < 30 Khz (-60 dB)
Spurious and image	More than 60dB
Audio output power	2W typ. (5% distortion )

Diamond antenna BU-50

Diamond antenna BU-50

Range - 1.7 to 40MHz
50ohms 
VSWR - Less than 1.5:1
Max power rating - 1.2kW(PEP)

Alinco DJ-V57

Alinco DJ-V57, HT Alinco DJ-V57, HANDY TALKY Alinco DJ-V57,  Alinco V57

Features
Waterproof to IPX7 standard
200 Memories
39 CTCSS Tone Squelch
104 DCS Digital Code Squelch
4 tone Bursts
9 DTMF AutoDial Memories
Built-in Speaker
Illuminated Keypad
Time-out Timer
Internal VOX

Alinco DJ-V57 2 meter / 440 MHz dual band HT built to stand up to the elements! It is ruggedly built to IPX7 standards meaning it can be submersed in 3 feet of water for up to 30 minutes. This radio transmits with a full 5 watts on both bands (or 5/4.5 on batteries). In fact you can select three RF levels (5, 2 or 0.5 watts). This radio has 200 memories, two-step attenuator, back-lit alphanumeric display and direct keypad frequency entry. The receive range is 136-173.995 MHz and 400-511.995 MHz. Tuning steps are: 5, 10, 12.5, 15, 20, 25 and 30 kHz. A strong 500 mW audio amp provides big audio. Both frequency and memory scanning is supported. Direct frequency entry via backlit keypad.

Alinco DJ-175, HT Alinco DJ 175, HANDY TALKY Alinco DJ-175

HANDY TALKY Alinco DJ-175

www.agenradio.com
www.rpmhamradio.com

HT Alinco DJ-175, HANDY TALKY Alinco DJ-175

Frequency range: TX/RX:136-174 MHz
(5 / 10 / 12.5 / 20 / 25 / 30 KHz steps)
RF Power output:Hi: 5 W
Mid: 2 W
Lo: 0.5 W
Receiver system Dual conversion superheterodyne
1st IF: 21.7 MHz
2nd IF: 450 KHz

HT Alinco DJ-175

Alinco DJ-175

Frequency range: TX/RX:136-174 MHz
(5 / 10 / 12.5 / 20 / 25 / 30 KHz steps)
RF Power output:Hi: 5 W
Mid: 2 W
Lo: 0.5 W
Receiver system:Dual conversion superheterodyne
1st IF: 21.7 MHz
2nd IF: 450 KHz